English 
Español 
Français 
Deutsch 
Dansk 
Svenska 
Norsk bokmål 
Nederlands 
Polski 
Italiano 
Diamond painting has gained immense popularity as a beloved craft that seamlessly blends the calming effects of coloring with the enchanting allure of sparkling diamonds. Once you’ve completed your diamond painting masterpiece, the next step is to preserve and display it. One excellent option is mounting it on foam board, which provides a sturdy backing and enhances the overall presentation. In this blog post, we will guide you through the process of mounting your diamond painting on foam board, ensuring your artwork stays protected and ready to be showcased.
Gather Your Materials
Before you begin, make sure you have all the necessary materials handy. Here’s a list of items you’ll need:
1. Diamond painting: Ensure your diamond painting is fully completed and free from any loose diamonds.
2. Foam board: Choose a foam board that is slightly larger than your diamond painting. Opt for an acid-free foam board to prevent any damage to your artwork.
3. Cutting tool: A utility knife or a pair of scissors will work well for cutting the foam board.
4. Glue: Acid-free glue or double-sided tape will be suitable for mounting the diamond painting.
5. Ruler and pencil: These will help you measure and mark the foam board accurately.
6. Optional: Frame or hanging materials, if you wish to frame or hang your mounted diamond painting.
Preparing the Foam Board
Now that you have your materials ready, let’s move on to preparing the foam board for mounting.
1. Measure and cut: Place your diamond painting on the foam board and trace around it lightly with a pencil. Using a ruler, add an additional 1-2 inches to each side of the traced outline and mark the foam board. Carefully cut along the marked lines with a utility knife or scissors, ensuring a clean and straight cut.
2. Remove excess foam: If your foam board is thicker than desired, you can carefully trim it down using a utility knife. Exercise caution to avoid cutting too deeply and causing any damage to the foam board.
Enter your email down below to get your discount code 👇
Mounting the Diamond Painting
With your foam board prepared, it’s time to mount your diamond painting onto it.
1. Apply adhesive: Lay your diamond painting face-down on a clean and flat surface. Apply a thin layer of acid-free glue or use double-sided tape along the edges of the foam board. Make sure you evenly distribute the coverage across the entire surface.
2. Position and press: Carefully place your diamond painting on top of the foam board, aligning it with the edges. Gently press the painting onto the foam board, starting from the center and working your way outwards. Use a clean, lint-free cloth or a rolling pin to ensure proper adhesion and remove any air bubbles.
3. Secure the corners: Apply additional adhesive to the corners of the diamond painting, ensuring they are securely attached to the foam board. This will help prevent any lifting or loosening of the canvas over time.
4. Optional framing or hanging: If you wish to frame your mounted diamond painting, choose a suitable frame and carefully position it around the artwork. Alternatively, you can attach hanging materials to the back of the foam board, such as adhesive hooks or a wire, to hang your diamond painting on the wall.
Conclusion
Mounting your completed diamond painting on a foam board not only provides support and protection but also enhances its display. By following the step-by-step guide provided in this blog post, you can easily mount your diamond painting onto a foam board, ensuring its longevity and making it ready to be admired by all. So, gather your materials, prepare the foam board, and confidently showcase your sparkling masterpiece for everyone to enjoy!
